Pair Rear Hatch Liftgate Tailgate For 03-06 Mitsubishi Outlander Lift Support

Fitment 2003-2006 Mitsubishi Outlander (Rear Hatch) Location Rear Hatch Item-Offered 2pcs New Left+Right Lift Supports Cross-Reference Can Replace The Following Part Numbers: SG314034,WGS-212,LSC-0212 Material Steel Color Black Installation-Instructions Always replace both lift supports to ensure top performance and to prevent twisting caused by uneven loading. 1.Turn off: If old lift support has a window demister electrical connection, carefully disconnect the fittings. 2. Before removing old lift supports, examine any fittings supplied to determine which components must be re-used. 3. Have someone hold the hatch, bonnet, boot or rear window open while replacing the lift supports. 4. Loosen the fasteners, remove 1 end while being prepared to fight the pressure in the strut, move the end so it's away from the bodywork, remove the other end, install that end of the new 1, wrestle the other end into place and tighten up. 5. Make sure all connectors and hardware are in place, tight and secure. Reconnect electrical terminals at both ends of the gas-charged lift support, if applicable to your car. Retain plastic end caps, if applicable to your car. WARNING: Use safety stands whenever a procedure requires you to be under the vehicle. Features-Advantages * Our Lift supports have the industry's highest quality in terms of long-lasting performance, smooth operation, functional safety, and ease of installation. * No drill needed, convenient installation and easy operation. * We feature the latest technology and most innovative features. Each gas charged lift support is tested in four different positions during compression and extension to measure speed and force. Each lift is then subjected to two overload tests to assure structural integrity and safety. * Enhances performance through improved oil and gas Pressure sealing. * Manufactured with bearing quality precision to promote longer operating life.