Dual Clutch Transmission Remover and Installer Tool Kit for Ford DPS6
144,00 $US-4%149,76 $US
Spécifications clés
- Condition
- New
- Country of Origin
- CN
- Package Contents
- 1 x Dual Clutch Transmission Remover and Installer Tool Kit; mounting hardware not included
- Has OE
- Non
- Number of Pieces
- 1
Détails complets du produit
Spécifications
| Attributs du produit: Condition | New |
|---|---|
| Attributs du produit: Country of Origin | CN |
| Attributs du produit: Package Contents | 1 x Dual Clutch Transmission Remover and Installer Tool Kit; mounting hardware not included |
| Attributs du produit: Has OE | Non |
|---|---|
| Attributs personnalisés: Number of Pieces | 1 |
| Détails du produit: Pièce universelle | Non |
Compatibilité
Aucun véhicule compatible disponible pour ce produit.
Description du produit
Overview Tool kit designed to remove, install, and reset a DPS6 dry dual-clutch transmission. Key Features - Three-jaw tool pulls the clutch after the retaining snap ring is removed - Threaded bar is turned 20 times after contacting the input shaft - Can respring the clutch springs for reinstallation - The transport fastener must be replaced if the clutch is reused What's Included 1 x Dual Clutch Transmission Remover and Installer Tool Kit; mounting hardware not included Installation Insert the locked clutch into the mounting sleeve, fit the extension feet into the proper holes, and tighten the screw. Remove the tool and install the retaining ring when the clutch is in place. Remove both motors and use a hex tool to rotate the motor teeth counterclockwise to the end on each side, then reinstall the motors. Vehicle Applications 2011-2019 Ford Fiesta 2012-2018 Ford Focus 2019-2019 Ford Transit Connect Ford B-MAX
