Autovado

Steering Inner & Outer Tie Rod End Rack And Pinion Bellow For Lexus Toyota

72,88 $US-4%76,10 $US

Spécifications clés

Condition
New
Country of Origin
US
Has OE
Non
Manufacturer Part Number
EC83902501
Interchange Part Number
EV420,ES3600,ES3601,103-3069

Détails complets du produit

Spécifications

Spécifications
Attributs du produit: ConditionNewAttributs du produit: Country of OriginUS
Attributs du produit: Has OENonAttributs personnalisés: Manufacturer Part NumberEC83902501
Attributs personnalisés: Interchange Part NumberEV420,ES3600,ES3601,103-3069Attributs personnalisés: Placement on VehicleFront, Inner, Outer, Right, Left
Attributs personnalisés: Custom BundleNoAttributs personnalisés: Modified ItemNo
Attributs personnalisés: Superseded Part Numberinner and outer tie rod end,rods endsAttributs personnalisés: Universal FitmentNo
Attributs personnalisés: Manufacturer Warranty10 YearsAttributs personnalisés: FeaturesGreasable
Attributs personnalisés: Items IncludedMounting HardwareAttributs personnalisés: TypeTie Rod Linkage
Attributs personnalisés: OE/OEM Part Numbercar tie rod end replacementAttributs personnalisés: AdjustableYes
Attributs personnalisés: Performance PartNoAttributs personnalisés: Mounting StyleBolt-On
Attributs personnalisés: FinishCoatedAttributs personnalisés: MaterialAlloy Steel
Attributs personnalisés: specSteering Inner & Outer Tie Rod End Rack and Pinion Bellow For Lexus ToyotaDétails du produit: Pièce universelleNon

Description du produit

Fitting the Following vehicle: 2002-2003 Lexus ES300 2002-2003 Toyota Camry Package Includes: 2x Front Inner Tie Rod End -EV4201x Front Outer Tie Rod End - Passenger Side -ES36001x Front Outer Tie Rod End - Driver Side -ES36012x Rack and Pinion Bellow -103-3069 Note (2). Although some parts have grease fittings, other parts are factory sealed, but do not affect the fit and quality of the parts 10 Year Warranty This item is backed by our 10-year warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only Tie-Rod End Replacement Guideline: This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod Note: Cleanliness is extremely important when working on the power steering. Incorrect work and contamination can lead to leakage and, in the worst case, to failure of the steering assistance 1.Lift the vehicle and dismount the front axle wheels 2.Spray the fastening nut of the tie rod end with rust remover and leave it on for a few minutes 3.Dismount the front underride guard 4.Loosen the fastening nut from the tie rod and remove it completely 5.Remove the tie rod end from the steering knuckle using an appropriate ball joint separator 6.Remove the clamp of the bellow on the steering gear 7.Push the bellow towards the tie rod end 8.Unscrew the inner tie rod from the rack 9.Clean the sealing face of the bellow at the steering gear 10.Clean the lug of the rubber contact surface of the ball joint in the steering knuckle Note:Always use new self-locking nuts and bolts for a reliable repair 11.Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer 12.Mount the bellow and close the clamps with the appropriate special tool Note:Incorrect mounting of the bellow can lead to corrosion of the rack: the steering gear starts leaking which can lead to a failure in the steering assistance 13.Secure the ball joint in the steering knuckle and mount the nut. Please observe the tightening torque suggested by the vehicle manufacturer Note:During mounting, the ball stud should not turn within the ball joint. This can cause damage inside the ball joint and can lead to early failure Tip:Secure the ball stud against twisting with a suitable tool 14.Mount the front underride guard 15.Mount the front wheels and tighten them with the tightening torque recommended by the vehicle manufacturer 16.Align the wheels and adjust them if necessary. Observe the vehicle manufacturer specifications 17.Perform a test drive Frequently Asked Questions (1).What are the symptoms of a bad sway bar? (2).What happens when a sway bar breaks?

Steering Inner & Outer Tie Rod End Rack And Pinion Bellow For Lexus ToyotaSteering Inner & Outer Tie Rod End Rack And Pinion Bellow For Lexus ToyotaSteering Inner & Outer Tie Rod End Rack And Pinion Bellow For Lexus ToyotaSteering Inner & Outer Tie Rod End Rack And Pinion Bellow For Lexus ToyotaSteering Inner & Outer Tie Rod End Rack And Pinion Bellow For Lexus ToyotaSteering Inner & Outer Tie Rod End Rack And Pinion Bellow For Lexus Toyota

Produits associés

Browse all parts