Specifications
Condition: New
Color:Black
Warranty:10 Year
Package Include
Fits the following vehicles
Note
Please be sure you review the compatibility information
If you have a question about the part please free contact us before buying, we will give you a best reply in time
We are galde to offer quality service and vehicle parts to you, any after sale questions please message us before open case or feedback, we will give you the best solution
Replacement Guideline
Ball joints
Purchase the correct replacement ball joint assembly for your vehicle
Remove the wheel and access the ball joint
Soak all the bolts with WD-40 or PB Blaster
Pull the cotter pin and loosen the large castellated nut
Pop loose the ball joint
Remove the allen bolts and slide the control arm free
Guide the new joint through the knuckle hole
Bolt the joint into place using the hardware included
Torque the bolts to the proper specifications
Screw in the new grease fitting and pump grease into the assembly
Control Arms
lift the vehicle using a car lift, ideally a wheel-free four-post car lift
loosen and remove the corresponding stabiliser fixing screws
Loosen the ball joint at the steering knuckle with a suitable special tool (e.g. a puller)
Remove the old control arm
Clean the mounting flange of the ball joint pin on the steering knuckle with sandpaper and then with brake cleaner
Fit the new control arm with the supplied accessories and attach new fixing screws and nuts
Reattach the stabilizer and, if applicable, the leveling sensor for headlight leveling to the control arm
lower the vehicle until the suspension is compressed
Tighten the fixing screws with the torque stipulated by the vehicle manufacturer
Lower the vehicle all the way
Measure the chassis and adjust if necessary
Check and, if necessary, adjust the headlight settings on vehicles with automatic headlight leveling where the leveling sensor is attached to the control arm
To conclude, test-drive the vehicle
Sway bars
To hold the stud on the end of the sway bar link while adding the new lock nut
Using the wrench, install the new lock nut, making sure to wrench it the whole way
With the sway bar link in position, put the nut on using your hand
Wrench the nut tight to the vehicle manufacturer recommended torque values
Changing wrenches as needed to fit the new sway bar link nut
Bad Control arm symptons
popping noise
steering is unstable
uneven tire wear
Signs of a ball joint breaks
Sound -A faint, intermittent clunking noise that seems to be coming from a corner of your vehicle
Steering-The steering sloppy or stiff
Tires -Uneven tire wear
Signs of sway bars breaks
Rattling and thumping noises on rough roads
Imprecise vehicle handling
Stronger inclination of the vehicle during cornering
Infiuence of a bad joint break
Causing mysterious clunking noise or drifting steering
Affecting your steering and suspension seriously
Importance of Control Arms
It is a link that connects the frame of the car to the wheel hub assembly or steering knuckle
It allows a driver to steer a car while also guiding the wheels up and down with the road surface
They have a vital role in a vehicle's overall stability and drivability
Infiuence of a bad
sway bars
Without the sway bar, the car will not handle and corner as well, or as comfortably for the driver and passengers
Item Specifics:
Placement on Vehicle: 0
Brand: auspartshouse
Manufacturer Part Number: 10007274
Number of Kit Pieces: 0
Manufacturer Warranty: 10 Year
Fitment Type: Direct Replacement
Mounting Hardware Included: No
Interchange Part Number: 0
Suspension Grade: Standard
Custom Bundle: Yes
Modified Item: No
Color: Black
Surface Finish: Polished
Packaging: New in Box
Type: Control Arm & Ball Joint Assembly
Adjustable: Yes
Greasable: Yes
Superseded Part Number: 0
