Autovado

4pcs For Armada Pathfinder Armada QX56 Titan Front Tie Rods Suspension Kit

US$68.62-3%US$71.08

Key specifications

Condition
New
Country of Origin
US
Has OE
No
Manufacturer Part Number
E81020002CP
Interchange Part Number
EV800216, ES800031, ES800032

Full product details

Specifications

Specifications
Product attributes: ConditionNewProduct attributes: Country of OriginUS
Product attributes: Has OENoCustom attributes: Manufacturer Part NumberE81020002CP
Custom attributes: Interchange Part NumberEV800216, ES800031, ES800032Custom attributes: Placement on VehicleFront
Custom attributes: Surface FinishPremium QualityCustom attributes: Custom BundleYes
Custom attributes: Bundle DescriptionTie Rod EndCustom attributes: Greasable or SealedGreasable
Custom attributes: Superseded Part NumberFront Driver and Passenger Side ReplacementCustom attributes: TypeTie Rod End
Custom attributes: Universal FitmentNoCustom attributes: Items IncludedMounting Hardware
Custom attributes: OE/OEM Part NumberSuspension Steering Tie Rod Ends Linkages AssemblyCustom attributes: Manufacturer Warranty10 Year
Custom attributes: AdjustableYesCustom attributes: Kit Included4 Pieces
Custom attributes: Cross Reference Part Number485217S000, 485207S025, 486407S025Custom attributes: Cross Part NumberTierod Tie Rod Tie Rods End Ends Link, For Infiniti
Custom attributes: Partlink Number2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015Custom attributes: FitmentSE LE XE Base PRO-4X Titanium SV Platinum S
Custom attributes: Fitment 2For Nissan QX56 2004-2013Custom attributes: Fitment 3For Nissan Armada 2005-2015
Custom attributes: spec4pcs For Armada Pathfinder Armada QX56 Titan Front Tie Rods Suspension KitProduct details: Universal partNo

Product Description

Fitting the Following vehicle: 2004-2013 Infiniti QX56 2005-2015 Nissan Armada 2004-2015 Nissan Titan 2004 Nissan Pathfinder Armada Package Includes: 2x Part # Front Inner Tie Rod Ends- EV800216 1x Part # Front Left Outer Tie Rod End- ES800031 1x Part # Front Right Outer Tie Rod End- ES800032 Note Although some parts have grease fittings, other parts are factory sealed, but do not affect the fit and quality of the parts 10 Year Warranty Please check above compatibility list to make sure it fits your vehicle Tie-Rod End Outer Tie-Rod End Inner Tie-Rod End Some inner tie-rod ends contain a bolt and bushing. These tie-rod ends are threaded onto the rack. Since the rack is connected directly to the tie-rods, the rack replaces the center link in a parallelogram steering linkage Some inner tie-rod ends have a mirror-finished ball and a high-strength polymer bearing to ensure low torque, minimal friction, and extended life. A hardened alloy steel rod extends from the ball to the outer tie-rod end and provides maximum strength and durability Tie-Rod End Replacement Guideline: This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod Note: Cleanliness is extremely important when working on the power steering. Incorrect work and contamination can lead to leakage and, in the worst case, to failure of the steering assistance 1.Lift the vehicle and dismount the front axle wheels 2.Spray the fastening nut of the tie rod end with rust remover and leave it on for a few minutes 3.Dismount the front underride guard 4.Loosen the fastening nut from the tie rod and remove it completely 5.Remove the tie rod end from the steeringknuckle using an appropriate ball joint separator 6.Remove the clamp of the bellow on the steering gear 7.Push the bellow towards the tie rod end 8.Unscrew the inner tie rod from the rack 9.Clean the sealing face of the bellow at the steering gear 10.Clean the lug of the rubber contact surface of the ball joint in the steering knuckle Note:Always use new self-locking nuts and bolts for a reliable repair 11.Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer 12.Mount the bellow and close the clamps with the appropriate special tool Note:Incorrect mounting of the bellow can lead to corrosion of the rack: the steering gear starts leaking which can lead to a failure in the steering assistance 13.Secure the ball joint in the steering knuckle and mount the nut. Please observe the tightening torque suggested by the vehicle manufacturer Note:During mounting, the ball stud should not turn within the ball joint. This can cause damage inside the ball joint and can lead to early failure Tip:Secure the ball stud against twisting with a suitable tool 14.Mount the front underride guard 15.Mount the front wheels and tighten them with the tightening torque recommended by the vehicle manufacturer 16.Align the wheels and adjust them if necessary. Observe the vehicle manufacturer specifications 17.Perform a test drive Frequently Asked Questions (1).When to replace tie rod ends? (2).Why should I get my tie rods inspected on a regular basis? (3).Vibrations (4).Shaking (5).Wandering

4pcs For Armada Pathfinder Armada QX56 Titan Front Tie Rods Suspension Kit4pcs For Armada Pathfinder Armada QX56 Titan Front Tie Rods Suspension Kit4pcs For Armada Pathfinder Armada QX56 Titan Front Tie Rods Suspension Kit4pcs For Armada Pathfinder Armada QX56 Titan Front Tie Rods Suspension Kit4pcs For Armada Pathfinder Armada QX56 Titan Front Tie Rods Suspension Kit4pcs For Armada Pathfinder Armada QX56 Titan Front Tie Rods Suspension Kit

Related products

Browse all parts