For 97-02 Expedition XLT Sport Utility Front Left Right CV Axle Shaft Assembly

Fitment: Ford Expedition 1997-2002 Ford F-150 1997-2003 Ford F-150 Heritage 2004 Ford F-250 1997-1999 Lincoln Navigator 1998-2002 How to change cv axle ? Step1: Removing the Vehicle’s Axle Nut Remove the vehicle’s hubcap. Remove the cotter pin from the axle nut Remove the axle nut Step2: Removing the Wheel and Brake Assembly Jack up the appropriate side of the car Place the vehicle on jack stands Remove the wheel Remove the brake caliper Unbolt the outer tie rod from steering knuckle Unbolt the hub from the strut tower Step3: Removing and Replacing the CV Axle Pry the CV joint. Insert the new CV axle into the transmission housing. Reinsert the axle through the hub assembly Notes: If the axle doesn’t immediately come loose, try twisting it back and force to break the seal. Refasten the assemblies in the order you removed them Reattach the wheel Tighten the axle nut Notes: Starting with the hub assembly to the strut tower, refasten all of the bolts you removed. Reconnect the outer tie rod to the steering knuckle next, and then reattach the caliper. How Long Should a CV Axle Last? A: CV axles are usually covered by the manufacturer’s powertrain warranty, which should have you covered for at least four to five years and 50,000 to 60,000 miles. As for whether or not the axle makes it past the warranty period, there are many factors that can impact its lifespan. Driving over rough terrain where there are rocks and debris can shorten the life of a CV axle, because there are more opportunities to damage the rubber boot that protects the moving parts. The same goes for driving in snowy or icy conditions, where salt and sand can also damage the rubber. In some cases, the rubber just dries out and cracks, which has the same effect