Autovado

2pcs Front Upper Ball Joints Kit For 1997-2001 2002 2003 Ford Expedition F-150

$49.24-10%$54.88

Key specifications

Condition
New
Country of Origin
US
Has OE
No
Manufacturer Part Number
E81035301CP
Interchange Part Number
K80014

Full product details

Specifications

Specifications
Product attributes: ConditionNewProduct attributes: Country of OriginUS
Product attributes: Has OENoCustom attributes: Manufacturer Part NumberE81035301CP
Custom attributes: Interchange Part NumberK80014Custom attributes: Placement on VehicleLeft, Right, Front, Upper
Custom attributes: TypeBall JointCustom attributes: Items IncludedMounting Hardware
Custom attributes: FeaturesGreasableCustom attributes: MaterialAlloy Steel
Custom attributes: Manufacturer Warranty10 YearCustom attributes: Mounting StyleBolt-On
Custom attributes: Universal FitmentNoCustom attributes: Surface FinishStandard
Custom attributes: Bundle ListingYesCustom attributes: Kit Parts IncludedUpper Ball Joints
Custom attributes: Greasable or SealedGreasableCustom attributes: Cotter Pin HoleYes
Custom attributes: Kit or Single PartKitCustom attributes: FitmentFor Ford Lincoln
Custom attributes: Cross Reference Part Number1997 1998 1999 2000 2001 2002 2003 2004Custom attributes: Quantity2pcs
Custom attributes: OE Spec or Performance/CustomOE SpecCustom attributes: FinishCoated
Custom attributes: spec2pcs Front Upper Ball Joints Kit For 1997-2001 2002 2003 Ford Expedition F-150Product details: Universal partNo

Product Description

Ball Joint Ball Joint Replacement Guideline: If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension The side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be faulty 1.Raise the vehicle and remove the front wheels 2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes 3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts 4.Loosen and remove the fixing nut of the ball joint on the steering knuckle Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket 5.Remove the bad or worn ball joint from the control arm 6.Loosen the compression ball joint on the steering knuckle using a suitable special tool 7.Clean the cone connection Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface 8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts 9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer 10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary 11.Finally, carry out a test drive Frequently Asked Questions (1).How will I know that I have to renew my ball joint parts? Or replace them? If your ball joint fails, you will listen to a strange sound while driving. And that sound may help you to realize that your ball joint has failed and you have to renew them (2).What happens if a ball joint breaks? When a ball joint breaks, you will hear a mysterious noise inside your car wheel Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car (3).Are worn ball joints dangerous? Yes, it can be quite dangerous. Because, a worn ball joint causes suspension damage, inspection failure, and breakage of related parts It might make your front suspension come apart while driving, so the wheels move in whatever direction inertia takes them. That can lead to a fatal accident (4).What happens if I don\'t replace ball joints? (5).Do I need to grease new ball joints? I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new 1 after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card

2pcs Front Upper Ball Joints Kit For 1997-2001 2002 2003 Ford Expedition F-1502pcs Front Upper Ball Joints Kit For 1997-2001 2002 2003 Ford Expedition F-1502pcs Front Upper Ball Joints Kit For 1997-2001 2002 2003 Ford Expedition F-1502pcs Front Upper Ball Joints Kit For 1997-2001 2002 2003 Ford Expedition F-1502pcs Front Upper Ball Joints Kit For 1997-2001 2002 2003 Ford Expedition F-1502pcs Front Upper Ball Joints Kit For 1997-2001 2002 2003 Ford Expedition F-150

Related products

Browse all parts